CATHETER LASER BONDER
APPLICATION PLANNING CHECKLIST
SAVASTO — 12 November 2026

Use this worksheet to prepare an application discussion. It is not a released specification or proof of equipment capability.
Do not include patient data, passwords, controlled drawings or confidential technical information without arranging a suitable exchange.

PROJECT
Company:
Contact:
Project stage and target timing:

WORKPIECE AND PROCESS
1. Which polymers and material combinations are involved?
   Notes:

2. What are the catheter dimensions and joint geometry?
   Notes:

3. Which bond locations and acceptance tests matter?
   Notes:

4. What output, loading and changeover requirements apply?
   Notes:

TECHNICAL SCOPE
Process technology
Platform approach: Laser bonding and welding
Application input: Define the material combination, joint geometry and processing method.
Your requirements:

Workpiece presentation
Platform approach: Catheter clamping with application-specific inserts
Application input: Confirm component dimensions, loading access and location features.
Your requirements:

Operator control
Platform approach: Touchscreen setup and stored process programs
Application input: Agree recipe parameters, operator access and the required process records.
Your requirements:

Process observation
Platform approach: Viewing interface for setup and observation
Application input: Define the inspection method separately from process observation.
Your requirements:

Platform format
Platform approach: Benchtop machine
Application input: Confirm installation dimensions, service access and utilities for the proposed configuration.
Your requirements:

ACCEPTANCE AND HANDOVER
Application trials: Agree representative materials, component tolerances and the sample set for the joint.
Agreed responsibility / requirement:

Bond evaluation: Define visual, dimensional, leak, pull or other mechanical tests where relevant to the application.
Agreed responsibility / requirement:

Repeatability: Review variation across samples, fixtures, operators and the proposed operating conditions.
Agreed responsibility / requirement:

Handover: Agree tooling identification, recipe/configuration records, operating guidance and acceptance documentation.
Agreed responsibility / requirement:

NEXT STEP
Discuss the application with SAVASTO at sales@savasto.com.
Exact configuration, utilities, capacity, performance and deliverables must be confirmed for the proposed machine.