CATHETER COATING MACHINE
APPLICATION PLANNING CHECKLIST
SAVASTO — 12 November 2026

Use this worksheet to prepare an application discussion. It is not a released specification or proof of equipment capability.
Do not include patient data, passwords, controlled drawings or confidential technical information without arranging a suitable exchange.

PROJECT
Company:
Contact:
Project stage and target timing:

WORKPIECE AND PROCESS
1. What catheter lengths, geometries and loading arrangements apply?
   Notes:

2. Which coating chemistry and pretreatment are specified?
   Notes:

3. What immersion, withdrawal and curing parameters are needed?
   Notes:

4. How will coating quality and process acceptance be evaluated?
   Notes:

TECHNICAL SCOPE
Process technology
Platform approach: Catheter dip coating and UV curing
Application input: Specify the coating system, pretreatment and required finished surface.
Your requirements:

Workpiece presentation
Platform approach: Manual loading with controlled vertical movement
Application input: Confirm catheter length, geometry, fixtures and loading arrangement.
Your requirements:

Curing stage
Platform approach: Integrated UV chamber
Application input: Define chemistry-specific exposure conditions and the method used to verify cure.
Your requirements:

Operator control
Platform approach: Touchscreen setup and stored process programs
Application input: Agree the sequence, parameters and process records for the proposed application.
Your requirements:

Platform format
Platform approach: Vertical floor-standing machine
Application input: Confirm installation dimensions, service access, ventilation and utilities.
Your requirements:

ACCEPTANCE AND HANDOVER
Chemistry and preparation: Identify the coating supplier’s process requirements and the condition of the surface before coating.
Agreed responsibility / requirement:

Coverage and surface: Agree coating coverage, visual condition and any dimensional or surface checks.
Agreed responsibility / requirement:

Coating performance: Define adhesion, lubricity, durability or other application tests and who performs them.
Agreed responsibility / requirement:

Handover: Agree solution handling, fixture identification, recipe records, operating instructions and maintenance scope.
Agreed responsibility / requirement:

NEXT STEP
Discuss the application with SAVASTO at sales@savasto.com.
Exact configuration, utilities, capacity, performance and deliverables must be confirmed for the proposed machine.